Loading ...
Loading ...
Loading ...
16
Operations
5. The machine can scrub in both forward and
backward, place the directional switch in the
forward direction is to move forward, backward is
to move backward. The horn will sound and the
squeegee will raise automatically (the vacuum
motor will turn off after a short delay) when driving
the machine backwards. This is to prevent
damaging the squeegee.
NOTE: Go slow when driving the machine
backwards.
6. Press the accelerator pedal, the machine will start
scrubbing, the speed can be adjusted by
controlling the force of your foot stepping on the
accelerator pedal. Light is slow, heavy is fast.
NOTE: Go slow on inclines and slippery surfaces.
7. To stop scrubbing, turn off the 1-Step switch, the
scrub head will raise automatically, the squeegee
will also raise after a short delay (the vacuum
indicator flashing), please keep moving until the
dirty water is picked up, and then release the
accelerator pedal and stop scrubbing.
8. Turn off the machine.
Brake Device
The machine is driven by the front drive wheel that is
equipped with a brake device. When you release the
accelerator pedal, the machine will stop moving, and
the park brake will engage after a short delay.
The machine is equipped with a Brake pedal that can
be used to control the machine if quicker stopping is
needed or if operating on an incline.
Emergency Stop Button
The machine is equipped with an emergency stop
button, please push it in an emergency. This will shut
off all power to the machine and it will brake
immediately.
To restart the machine, please reset the emergency
stop button, and turn off the main power key switch,
then turn on key switch.
NOTE: Please hold the steering wheel then push
the emergency stop.
While Operating The Machine
Fire or explosion hazard. Do not pick up flammable
materials or reactive metals.
1. Go slow on inclines and slippery surfaces, go slow
when turning and reversing. Do not operate the
machine on inclines that exceed 2%.
2. Drive machine in as straight of a path as possible.
Avoid turning the Steering wheel too sharply when
the machine is in motion. avoid sudden turns
except emergencies.
3. Do not keep the machine in the same position with
pad / brush spinning, keep the machine moving to
prevent damage to floor finish.
4. If the squeegee assembly leaves streaks on the
floor, raise the squeegee off the floor and wipe the
blades down with a damp cloth. Pre-sweep the
area to prevent leaving streaks on the floor.
5. To obtain the optimum cleaning performance, you
can adjust the brush pressure, solution flow, and
detergent dosage as needed. If the machine is not
picking up the water properly, please stop
scrubbing and check the squeegee blade. Adjust
or replace if necessary.
6. If the dirty water path exceeds the width of
squeegee, please adjust the side squeegee
assembly.
7. Pour a recommended defoamer into the recovery
tank if excessive foam appears.
The foam does not activate water level switch,
excessive foam may result in vacuum motor
damage.
8. Press the horn button to alert if necessary.
9. If there is a fault code F10 (Batt low) on the LED
display screen, the machine will stop scrubbing
and alarm, please drive the machine to the
charger.
10. If there is a fault code F08 (Rec Tank Full) on the
LED display screen, the vacuum motor will stop
working and alarm. Please drain the water from the
machine recovery tank.
If there is a fault code F09 (Soln Tank Empty) on
the LED display screen, the detergent system will
8.645-040.0 Operator Manual KIRA B100 R
Loading ...
Loading ...
Loading ...