Loading ...
Loading ...
Loading ...
-
When the water level
in
the bottom tray reaches
a predetermined level,
Carefully move the unit to a drain location,
remove the bottom drain plug and let the
water drain away (Fig.2
1
). Reinstall the bottom
drain plug and restart the machine until the P1
symb
ol disappears. If the error repeats, call for
service.
" "
the unit beeps 8 times and
the digital display area shows P1 . At this time
the air conditioning/dehumidification process will
immediately stop. However, the fan motor will
continue to operate (this is normal).
" "
Fig.19
Fig.20
Fig.21
INSTALLATION INSTRUCTIONS
Water drainage:
Remove the
drain plug
Continuous
drain hose
Bottom drain plug
-
plug from the back of the unit. You may also
connect a 3/4" (1.9cm) garden hose (sold
separately) onto the 5/8" (1.58cm) drain
connector on the unit. For models without a
drain connector, just attach the drain hose to
the hole. Place the open end of the hose directly
over the drain area in your basement floor.
Please refer to Fig.19 & 20.
I n dehumidifying mode,remove the drain
Loading ...
Loading ...
Loading ...