Loading ...
Loading ...
Loading ...
9. BASIC HEAT GUN OPERATIONS
9.1 SAFETY SWITCH – FIG.4
The safety switch stops accidental operation of the
trigger. To use push the safety switch (3) to either
the left or right of its usual position.
9.2 OPERATING THE TRIGGER
SWITCH – FIG.5
Operate the trigger (4) by first pushing the safety
switch left or right and then pull trigger. Release to
stop operation.
9.3 PAINT REMOVAL FROM WINDOW
FRAMES – FIG.6
IMPORTANT: Do not direct the heat gun at the
glass during use as it may crack. Always use the
glass protection nozzle (7). Do not touch the glass
with the hot nozzle.
9.4 HEATING AND SHAPING
PLASTIC TUBING – FIG.7
Fit the reflector hook nozzle (8). Carefully heat
the tubing evenly moving it from side to side.
9.5 DEFROSTING WATER PIPES
IMPORTANT: Do not defrost plastic tubing/piping.
Fit the reflector hook nozzle (8). Gently heat the
frozen area of the pipe starting from the edge of
the area and moving in towards the centre.
IMPORTANT: Take care not to heat the pipe too
quickly as this could cause the pipe to crack and
burst. Do not overheat water pipe joints as these
are only soldered together (max. 200°C).
– 15 –
(4)
4 FIG.
5 FIG.
6 FIG.
7 FIG.
(3)
(7)
(8)
Loading ...
Loading ...
Loading ...