Loading ...
Loading ...
Loading ...
Customizing Features/Options - Model WriES20
Recharge
Recharge button is used to initiate an immediate recharge.
} " • • ,,
Press and hold the O RECHARGE button until the w{ rds RE(HARGE NOW flashes
in the display, and the softener enters the fill cycle of regeneration right away.
"RECHARGE NOW" will flash during the regeneration. When over, full water
conditioning capacity is restored.
I I
: I)_PM
RECHARGE NOW
RECHARGE NOW Initiated
NOTE:
Avoid using hot water while the conditioner is regenerating, because the water heater will
refill with bypass hard water.
Recharge Tonight
If you do not want to start all immediate recharge, but would like an extra recharge at the next preset
recharge time, do the tk)llowing to schedule a recharge.
• Press and release (do not hold) the (_ RECHARGE button. The words "RECHARGE
TONIGHT" flashes in the display, and the softener will recharge at the next recharge time.
"RECHARGE NOW" will flash during the regeneration. When over, full water
conditioning capacity is restored.
!)_.. PM
RECHARGE TONIGHT
RECHARGE TONIGHT Initiated
"Power- Outage Memory"
If electrical power to the water softener is lost, "memory" built into the timer circuitry will keep all
settings tk)r up to eight hours. While the power is out, the display is blank and the water softener will
not regenerate. When electrical power is restored, the folk)wing will occur.
1. You have to reset the present time only if the display is flashing. The HARDNESS and
RECHARGE TIME never require resetting unless a change is desired. Even if the clock is
incorrect after a long power outage, the softener works as it should to keep your water soft.
However, regenerations may occur at the wrong time of day until you reset the clock to the correct
time of day.
NOTE: If the water softener was regenerating when power was lost, it will now finish the cycle.
2i
Loading ...
Loading ...
Loading ...