Loading ...
Loading ...
Loading ...
10
Removing the door:
1. The air fryer has a removable door, which can be pulled apart from the
appliance for easier cleaning.
2. To separate the door from the air fryer, push the door as far down as it will go
(about 70 degrees), then push the grooved latch on the right-hand side of the
hinge horizontally to release the door. Once the door has been released, pull it
downward to separate it from the body of the fryer.
3. To reinstall the door, align the edges of the door with the holes on either side
of the hinge, and insert it as shown in the images below.
Automatic Switch Off:
The Tower Air Fryer has a built in timer, which will automatically shut off the air
fryer when the timer reaches zero. You can manually switch off the air fryer by
pressing the key until the timer reaches zero.
Preparing For Use:
1. Place the appliance on a stable, horizontal and even surface. Do not place the
appliance onto a non-heat-resistant surface.
2. Pull the cord from the storage compartment located at the bottom of the
appliance.
3. Do not ll the fryer with oil or any other liquid.
4. Do not put anything on top of the appliance, as this will disrupt the airow and
the hot air frying will be affected as a result.
Air Frying:
1. Connect the mains plug into an earthed wall socket.
2. Open the air fryer door.
3. Put the ingredients into the air fryer.
4. Close the air fryer door. The fryer will give off a beeping sound and all the
indicators will light up momentarily.
5. After a few seconds, all of the indicators will go off except for the indicator,
which will remain illuminated to indicate the appliance is turned on but in
Standby mode. Press this key at any time while the fryer is in this mode to
bring up the touch control panel.
Note: If no keys are pressed or selections made after the control panel is lit, the air
fryer will automatically go into standby mode after 90 seconds of inactivity.
5 - Using Your Appliance
Loading ...
Loading ...
Loading ...