Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
43
3. To Replace the Door Glass Panel
Remove the oven door (see 1. To Remove the Oven Door).
To remove the inner door glass panel, carefully place the
door, outer side up, on a clean level surface. Undo the 3
retaining screws in the top of the door and remove the trim.
Undo the 5 retaining screws from the lower edge of the door
and remove the bottom trim (Fig. 11.19). Lift out the glass
panel.
To remove the centre glass, carefully place the door, inner
side up, on a clean level surface. Remove the outer door panel
(see 2. To Remove the Outer Panel).
Undo the 8 screws holding the centre glass panel assembly
in place (Fig. 11.20). Lift out the centre glass panel assembly,
gasket and inner centre glass panel.
Reassemble in reverse order.
4. To Replace the Oven Door Hinge
Remove the oven door (see 1. To Remove the Oven Door).
Lift out the inner panel and place it, outer side up, on a clean
level surface. Undo the screws securing the hinge in place.
Remove the hinge.
Replace the hinge and rebuild the door in reverse order.
5. To Replace the Oven Door Seal
Open the oven door. The seal is held in place by small spring
clips to the cooker front. At the corner, squeeze the clip and
pull the seal diagonally away from the door centre until that
clip is released (Fig. 11.21).
Proceed to the next clip and release it in a similar way, and
so on. Use force if the clips are sti, as the old seal will be
discarded.
When tting the new seal, position the seal join at the
bottom. Clip the new seal in one of the corner holes of the
door, and proceed round the door snapping in each spring
clip in turn.
ArtNo.320-0005 Oven door rubber seal
Gasket
Centre glass
panel assembly
Inner centre
glass panel
Fig. 11.20
Fig. 11.21
Loading ...
Loading ...
Loading ...