Loading ...
Loading ...
Loading ...
12. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Test fan speeds with the
different fan speed buttons on remote control.
Test the light ON/OFF function with the
button on the remote control. Test dimmer
function by holding down the button for
more than 0.7 seconds. If the remote control
operates all of the functions of the fan and light,
battery has been installed correctly (diagram 1).
If fan and/or light does (do) not function, please
refer to "Troubleshooting" section to solve any
issues before contacting Customer Service.
Turn fan completely off before moving the
reverse switch (located on top of motor housing).
Set reverse switch to recirculate air depending on
the season:
- LEFT position in summer (diagram 2)
- RIGHT position in winter (diagram 3)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely to the LEFT or completely to the RIGHT
for fan to function. If the reverse switch is set in
the middle position (diagram 4), fan will not
operate.
page 9
diagram 2
diagram 3
diagram 4
reverse switch
motor housing
diagram 1
Loading ...