Loading ...
Loading ...
Loading ...
_,CAUTION: Before performing any service or adjustments:
• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift lever in neutral (N) position.
• Place attachment clutch in =DISENGAGED" position.
• Turn ignition key =OFF" and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come
in contact with plug.
TO REMOVE MOWER
Mower will be easier to remove from the
rightside of tractor.
• Place attachment clutch in =DISEN-
GAGED" position.
• Move attachment liftlever-forward to
lower mower to its lowest position.
• Roll belt off engine pulley.
• Disconnect clutch rodfrom clutch lever
by removingretainer spdng.
• Disconnect anti-swaybar from chassis
bracket by removing retainer spdng.
• Disconnect suspension arms from rear
deck brackets by removing retainer
spdngs.
• Disconnect front linksfrom deck by
removing retainer spdngs.
• Raise liftlever to raise suspension
arms. Slide mower out from under trac-
tor.
IMPORTANT: If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links.
TO INSTALL MOWER
• Raise attachment lift lever to its highest
position.
• Slide mower under tractor with dis-
charge guard to dght side of tractor.
• Lower liftlever to its lowest position.
• Install mower in reverse order of
removal instructions.
Clutch
Retainer
Suspension
Arms
Pulley
Front
Link
(Both Sides)
Retainer
Spring
Anti-Swaybar
(BothSides)
21
Loading ...
Loading ...
Loading ...