Kenmore 79075904993 Elite range

User Manual - Page 30

For 79075904993.

PDF File Manual, 34 pages, Download pdf file

Loading ...
Loading ...
Loading ...
General
Cleaning
I_|_ The door is
heavy. For safe,
temporary storage, lay
the door flat with the
inside of the door facing
down.
To
To
1.
2.
3.
4.
Remove and Replace Oven Door
Remove Oven Door:
Open the door.
Remove screw A located on the inside of the oven door near the hinge (one on each
side).
Close the door to the quarter-open position. Grasp the door firmly on both sides
and lift up and off the hinges.
To clean oven door, follow the instructions provided in the cleaning chart under
General Cleaning.
To Replace Oven Door:
1. Be sure the hinge arms are in the quarter-open position. Be careful if pulling the
hinges open by hand. The hinges may snap back against the oven frame and could
pinch fingers.
2. Hold the door at the sides near the top. Insert the hinge arms into slots at the
bottom of the door.
3. Hinge arms must go into the range slots evenly. The hinge arms should be inserted
into the bottom corners of the door as far as they can go.
4. If the door is not in line with the oven frame, remove it and repeat the above steps.
[]j FuI up_,_ h|e"
LeE Gide _ .
Figure 1
Figure 2
To Remove and Replace Warmer Drawer
To Remove Warmer Drawer:
1.
2.
3.
5.
To
1.
2.
3.
__ Turn power off before removing the warmer
drawer.
Open the drawer to the fully opened position.
Locate glide lever on each side of drawer, pull up on the left
glide lever and pushdown on the right glide lever (see figure
1).
Pull the drawer away from the range.
Replace Warmer Drawer:
Pull the bearing glides to the front of the chassis glide
(see figure 2).
Align the glide on each side of the drawer with the glide slots
on the range.
Push the drawer into the range until levers "click"
(approximately 2"). Pull the drawer open again to seat bearing
glides into position. If you do not hear the levers "click" or
the bearing glides do not feel seated, remove the drawer
and repeat steps 1 thru 3. This will minimize possible damage
to the bearing glides.
,_|_ To avoide electrical shock which can
result in serious injury or death, disconnect appliance
from electric power before cleaning and servicing the
warmer drawer.
3O
Loading ...
Loading ...
Loading ...