Loading ...
Loading ...
Loading ...
6 www.electrolux.com
1.3 Usage cautions
• Be sure to turn the unit off and disconnect the power supply
cord before performing any maintenance or cleaning�
• Do not put unit near any heat source or open re when you
replacing the lters�
• Do not splash or pour water directly onto the unit� Water can
cause electrical shock or equipment damage�
• Drainage should be performed whenever moving the air
conditioner� If any water remains in the tank, it may spill out
while being moved�
• To ensure proper drainage, the drainage hose must have
no kinks and must not be elevated during dehumidicatioin
mode� If not, the drained water may spill out into the room�
• The temperature around the drainage hose must not be
below freezing point when used� Drained water may freeze
inside the hose, causing water inside the unit to overow into
the room�
• Do not block the exhaust air outlet with obstacles� Cooling
performance may be reduced or stop completely�
• Provide a anti-explosive residual current device (RCD) in
order to protect against electric shock in accordance with
Australian Standard and Wiring Rules�
• Exposure to direct airow for an extended period of time
could be hazardous to your health� Do not expose occupants,
pets, or plants to direct airow for extended periods of time�
• Do not use this air conditioner for non-specied special
purposes (e�g� preserving precision devices, food, pets,
plants, and art objects)� Usage in such a manner could harm
such property�
• Do not use means to accelerate the defrosting process or to
clean, other than those recommended by the manufacturer�
• The appliance shall be stored in a room without continuously
operating ignition sources (for example: open ames, an
operating gas appliance or an operating electric heater)�
• Do not pierce or burn�
• Compliance with national gas regulations shall be observed�
• Keep ventilation openings clear of obstruction�
• The appliance shall be stored in a well-ventilated area where
the room size larger than 12 m
2
�
Loading ...
Loading ...
Loading ...