Loading ...
Loading ...
Loading ...
15ENGLISH
7. OPERATING INSTRUCTIONS
Some of the following instructions
can only be used by using the
Control Panel�
It is not necessary to use the
drainage hose in the "cool" mode�
Cooling mode
Heating mode (on some models)
In this mode the exhaust adaptor hose
MUST be used�
In this mode the exhaust adaptor hose
MUST be used�
Before operating the unit, plug in the unit
and press the "ON/OFF" button to start�
7.1
Usage of the Control
Panel
1. Press the "mode" button until the Cool
mode indicator is lit�
2. Press the "fan speed" button to
choose the fan speed according
to the illumination of the fan speed
indicator� You can choose the fan
speed as following sequence:
“auto”
→
“hi”
→
“med”
→
“low”
→
“auto”�
3. Press the “
” or “ ”button to choose
the temperature you want�
1. Press the "mode" button until the "Heat"
indicator is lit�
2. Press the "fan speed" button to
choose the fan speed according
to the illumination of the fan speed
indicator� You can choose the fan
speed as following sequence:
“auto”
→
“hi”
→
“med”
→
“low”
→
“auto”�
3. Press the “
” or “ ”button to choose
the temperature you want�
4. Connected drain hose� See 7�4
Drainage section�
6. AIR CONDITIONER FEATURES
6.1
Control Panel
1
235689 7 4
1
2
7
3
4
5
6
8
9
Displays temperature/time
Power ON/OFF
Sleep
Filter Reset
Fan Speed
Adjust Temperature or Timer
Mode Selection
*
Timer
Swing
Dry mode
Press the "mode" button until the Dry
mode indicator is lit� The screen displays
the room temperature�
At the same time, the "low" fan indicator
lights�
Note: In this mode, fan speed cannot be
selected�
* Heat mode is not applicable to all models�
Note: Fan start will be delayed until the
unit reaches adequate temperature�
Loading ...
Loading ...
Loading ...