Loading ...
Loading ...
Loading ...
14 www.electrolux.com
)LJ
)RDPVHDO$
DGKHVLYHW\SH
1. Cut the Foam seal* (adhesive type)
tothe proper lengths and attach them
to the window frame� See Fig� 14�
5.3 Installation in a sliding sash
window
)LJ
:LQGRZVWRRO
:LQGRZVOLGHUNLW
VFUHZV
FPa
FP
)LJ
:LQ
PP
VFUHZV
PP
VFUHZV
GRZVWRRO
:LQGRZVOLGHUNLW
)LJ
)RDPVHDO%
)LJ
2. Open the window sash and place the
window slider kit on the window stool
(Fig� 15)� Attach the window slider kit
to the window frame� Adjust the length
of the window slider kit according to
the height of window� Screw down the
two screws on the window slider kit�
See Fig� 15� Cut the adjustable window
slider kit if the height of window is less
than 67�5cm (Fig� 10)�
3. Close the window sash securely against
the window slider kit� (Fig� 16)
4. Drive two 12�7mm screws to secure the
window slider kit to the window sash�
(Fig� 16)
5. Drive two 19mm screws to secure the
window slider kit to the window frame�
(Fig� 16)
6. Cut the Foam seal* to an appropriate
length and seal the open gap between
the sliding sash and outer window sash,
as shown in Fig� 17�
7. To secure sliding sash in place, attach
right angle safety lock with 12�7mm
screw as shown (Fig� 18)�
* = source locally
Loading ...
Loading ...
Loading ...