Loading ...
Loading ...
Loading ...
49
Miscellaneous
Remote antenna extension kit
The remote antenna extension kit allows the antenna
to be remotely installed.
Model 86LM
Plug-in loop detector
Low power. Conveniently plugs into existing control
board. Not to be used as entrapment protection.
Model LOOPDETLM
Loop detector
Low power loop detectors mounted and wired
separately inside control box. LiftMaster low power
accessory. Not to be used as entrapment protection.
Model LD7LP
Vehicle sensing probe
The vehicle sensing probe is buried in the ground and
can detect a car as it approaches and will then open
the gate.
Model CP4
Solar panel kit
This kit is to replace or add a solar panel to the
operator application. 60W maximum for 24 Vdc
operators and 30W maximum for 12 Vdc operators.
Models SP10W12V (10 Watt, 12V) and SP20W12V
(20 Watt, 12V)
Magnetic gate lock
Outdoor magnetic lock, transformer, junction box,
mounting plate and hardware. Not for use with Solar
Applications. Must be powered separately.
Model MG1300
Heater
The heater keeps the gearbox and batteries at a
suitable temperature when the outside temperature is
below -4°F (-20°C). The thermostat MUST be set
between 45°F and 60°F (7°C and 15.5°C) to ensure
proper gate operation. The heater can be powered by
110 to 250 Vac.
Model HTR
Solenoid lock harness kit
Model K77-37972
Warning sign
Model 40-39235
#50 Chain Drive Sprocket
(Model INSL24UL ONLY)
Model INSL50CH
Long range RFID reader
Model LMSC1000
LiftMaster
®
Internet Gateway
Internet enabled accessory which connects your gate
operator to your WiFi network and allows you to monitor
and control gate operators and lighting accessories
enabled by myQ
®
technology.
Model 828LM
myQ
®
Business™ connected access protocol - high
capacity
Models CAPXLV and CAPXM
Transformer kit
Changes input voltage (208/240/480/575 Vac) to an
output voltage of 120 Vac. Rated 208/240/480/575 Vac,
5.2/4.5/2.3/1.9 A, 60 Hz, 1 PH
Model 3PHCONV
Batteries
Gate access system batteries replace or upgrade the gate operator batteries. Two
identical 12 Vdc batteries are required for each gate operator. Do not mix 7AH and 33AH
batteries within a gate operator.
7AH batteries
Standard 7 AMP-Hour Battery, 12 Vdc, to replace original
batteries provided with operator. Reuse existing
harnesses.
Models 29-NP712 (2) and K74-30762 (1)
33AH batteries
Upgrade 33 AMP-Hour Battery, 12 Vdc. Ideal for solar
applications and extended battery backup. Two required.
Model A12330SGLPK
Must use INBAT33 - mounting bracket.
Battery harness, 33AH, HD Gates
For 33AH battery applications.
Model K41-0102-000
Riser
Riser for elevating operator for pad mounting and retrofit
to most SL585 applications.
Model MRIN
ACCESSORIES
Loading ...
Loading ...
Loading ...