Loading ...
Loading ...
Loading ...
Setting Surface Controls
continued)
Expandable & Bridge Radiant
Element Control Dial
Knob may book different
Ceramic Glass Cooktop (some models) (continued)
EXPANDABLERADIANT HEATING UNITS (some models)
This heating unit adapts to both small and large heating utensils. The unit control
dial hasa dual set of graduations. For small utensils usethe left side of the control
dial; for large utensils the right. Only the inner surface of the unit heats when using
it for small utensils; the whole surface heats for large utensils. The hot surface and
surface indicator lights will glow when the heating unit isturned ON.
Note: During any heat setting of the outer radiant element, the inner radiant ele-
ment cycles on and off with the outer element.
BRIDGERADIANT HEATING UNITS (some models)
Its principal advantage isto allow you to create larger cooking zone for larger pan
suchsas roaster, griddle or some other specialty pans.
Tousethe bridge element, turn the control knob on right side, to the bridge burner
graduations.
Forfutl bridge element operation turn on the left rear burner.
Touseonly the front element, turn the control knob on left side, to the front burner
graduations.
Indicator Lights
(for models with Ceramic
Glass Cooktop)
Two different surface control lights will glow on your range: Surface Indicator Lights
and Hot Surface Indicator Lights.
• The surface indicator lights, located on the control panel, glow when any
surface unit is turned on. A quick glance at the lights after cooking is an easy
check to be sure all surface controls are turned off.
The hot surface indicators lights, located under the glass cooktop, will
come on asthe surface cooking area heats up and will continue to glow until the
glass cooktop has cooled down to a moderate level. The lights may remain on
even though the controls are turned to OFR
Loading ...
Loading ...
Loading ...