Loading ...
Loading ...
Loading ...
To Operate the Warmer
(Warm & Ready TM) Zone
(some models)
Warmer Zone Control Dial
Knob may book different
Warmer Zone Recommended
Food Settings
Food Item Heating
Level
Breads/Pastries LO
Casseroles LO
Dinner Plateswith Food LO
Eggs LO
Gravies LO
Meats MED
Sauces MED
Soups (cream) MED
Stews MED
Vegetables MED
Fried Foods HI
Hot Beverages HI
The purpose of the warmer zone isto keep hot cooked foods at serving tempera-
ture. Use the warmer zone to keep cooked foods hot such as: vegetables, gravies,
casseroles, soups, stews, breads, pastries and oven-safe dinner plates. Always start
with hot food. Do not heat cold food on the warmer zone.
All food placed on the warmer zone should be covered with a lid or aluminum foil.
When warming pastries or breads, the cover should havean opening to allow mois-
ture to escape. Do not use plastic wrap to cover food. Plastic may melt onto
the surface and be very difficult to clean.
Useonty dishware, utensils and cookware recommended for oven and cooktop use
on the warmer zone.
_'_ Always usepotholders or oven mitts when removing food from the
warmer zone ascookware and plates will be hot.
To Set the Warmer Zone Control
1. Toset the control, push in and turn the knob. Thetemperatures are approximate,
and are designated by HI, MED and LO. However, the control can be set at any
position between HI and LOfor different levels of heating.
2. When done, turn the control to OFRThewarmer zone will remain warm until the
hot surface indicator light goes off.
Temperature Selection
Refer to the chart for recommended heating levels. If a particular food is not listed,
start with the medium level, and adjust as needed. Most foods can be kept at
serving temperatures by using the medium level.
Indicator Lights
The surface indicator light islocated below the warmer zone control. It turns on
when the control isset, and stayson until the control isturned off. The hot surface
indicator light, located on the control panel, will come on when the control isset
and will continue to glow until the glass cooktop has cooled down to a moderate
level.
The warmer zone will not glow red when it ishot, but becomes hot
enough to cause burns. Avoid placing hands on or near the warmer zone until the
hot surface indicator light isoff.
Warmer Zone
\
\
\ Hot Surface
Indicator Light
10
Loading ...
Loading ...
Loading ...