Loading ...
Loading ...
Loading ...
5
Installation
1. Take off hinge cover(Part #1, page 3) with an upward motion. Refer to
illustration below:
2. Take the anti-tip bracket and screws from the accessory bag. Tighten
the anti-tip bracket on the top of the product with screws as follows in
the illustration.
Note: Follow instructions properly or you may do damage to the product.
so as not to damage accidently the cabinetry or
flooring. Then perform the
same adjustments to the front leveling legs to bring the front of unit to the
proper level to install the anti-tip bracket and fit evenly under the counter.
4.
Another set of anti-tip brackets for side installation is provided as option
when the counter top is granite and hard to fix by screws. This set of
brackets includes two anti-tip brackets and eight screws for installation on
left side and right side of the cabinet. The illustration below shows this. T
he
drawer needs to be open to perform this procedure.
necessary for a proper fit in the cabinet opening. Start with the rear legs
(if necessary) before you slide the unit fully into the opening - raise or lower the
rear legs to make the unit fit properly. Then carefully slide the unit into opening
Loading ...
Loading ...
Loading ...