Bonsenkitchen VS3802 Vacuum Sealer

Operating Instructions - Page 13

For VS3802. Also, The document are for others Bonsenkitchen models: VS3801, VS3803

PDF File Manual, 14 pages, Read Online | Download pdf file

VS3802 photo
Loading ...
Loading ...
Loading ...
13
NOTE: Once you have sealed 5 bags continuously, allow the appliance to cool down for
about 1 minute. During this cool-down phase, you cannot start the appliance. After the
cool-down phase, you can use the appliance as normal.
Cleaning
Remove the plug from the mains power socket before beginning to clean the device.
Ensure there isn’t moisture can penetrate the device during leaning.
Do not use aggressive or abrasive cleaning agents, as these may corrode the surface
of the casing.
Do not use any hard or sharp objects to remove any adhesive from the welding wire.
Otherwise the welding wire or the insulation could be damaged.
Clean the surface of the appliance with a lightly moistened cloth and a mild
detergent.
Wipe off the upper and the lower sealing rings, as well as the press seal with a damp
cloth. Ensure that the appliance is dry before using it again.
Storage
The appliance has a built-in cable retainer on the underside of the housing, on which
you can wrap the power cable when it is not in use. This prevents the power cable
from getting caught or soiled, or becoming a source of danger by hanging loosely
down.
Store the appliance in a clean, dry place away from direct sunlight.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number(S/N: 12345) available as proof of
purchase.
You will find the item umber as a sticker on the rear or bottom of the appliance.
If function or other defects occur, please contact the service centre listed either by
telephone or by email.
If you have any further assistance, please contact us:
Customer service: 1-888-965-8032
Loading ...