Loading ...
Loading ...
Loading ...
11
Setting the Soundbar
Powering On/Off
OPERATE INSTRUCTIONS
1: Plug the power cord into the mains, the display should light up.
2: Switch the soundbar on by pressing the power button on the soundbar or the STANDBY button on the remote.
The default input mode will appear on the display after being switched on.
3: Select the input mode by pressing the power button again or by pressing the INPUT button on the remote.
1. The unit will automatically switch to standby mode when no audio input is received for 20 minutes.
The soundbar will wake up from standby mode when any button is pressed or source input is received.
2. If the TV or the external unit is disconnected, switch it off
• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.
3. The screen will be turned off for around 10 seconds without any operation, when pressing the buttons
on the sound bar or on remote control or the using iphone's volume increase or decrease, the display will be
waken up again.
Auto Standby
1. Plug the power cord of the soundbar & subwoofer into a wall outlet, it will automatically enter standby mode;
2. Press the STANDBY button on the soundbar or POWER button on the remote control to
turn the soundbar on. Make your selection of the desired input modes by pressing the INPUT button on the
remote or the power button on the soundbar.
3. To turn off, press and hold the STANDBY button or POWER button on remote control for about 2 seconds,
the soundbar will enter standby mode, and then unplug it from the wall outlet.
Volume value: the volume value is 00-35, and the factory set value is "15". It has last volume memory function.
Mode switching: BT/OP/HD/AU/ connection mode can be switched; meanwhile the selected mode will be
displayed on the display screen.
Display screen: BT/OP/HD/AU/E1/E2/3D volume value display
HDMI (ARC) mode
News mode
e3
3D mode
LED DISPLAY
Loading ...
Loading ...
Loading ...