Loading ...
Loading ...
Th is product requires a th ree-prong grounded outlet.
Th e in staller must per form a ground contin uity check
on th e power outlet box before beginn ing the
installation to en sure that th e outlet box is properly
grounded. If not properly grounded, or if th e outlet
box does not meet electrical requiremen ts noted
(under ELECTRICAL REQUIREMENTS), a qualified
electrician should be employed to correct an y
deficiencies.
CAUTION: For personal
safety, remove house fuse
or open circuit breaker
before beginning
installation to avoid severe
or fatal shock injury.
CAUTION: For personal safety, the mounting surface
must be capable of supporting the cabinet load, in
addition to the added weight of this 63–85 pound
(28.5–38.5 kg) product, plus additional oven loads of
up to 50 pounds (22.7 kg) or a total weight of
113–135 pounds (51.3–61.2 kg).
CAUTION: For personal safety, this product cannot
be installed in cabinet arrangements such as an island or
a peninsula. It must be mounted to BOTH a top cabinet
AND a wall.
NOTE: For easier installation and personal safety, it is
recommended that two people install this product.
IMPORTANT – PLEASE READ CAREFULLY. FOR
PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED TO AVOID SEVERE OR
FATAL SHOCK.
The power cord of this
appliance is equipped with a
three-prong (grounding)
plug which mates with a
standard three-prong
(grounding) wall receptacle
to minimize the possibility
of electric shock hazard
from this appliance.
You should have the wall receptacle and circuit checked
by a qualified electrician to make sure the receptacle is
properly grounded.
Where a standard two-prong wall receptacle is
encountered, it is very important to have it replaced
with a properly grounded three-prong wall receptacle,
installed by a qualified electrician.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT,
DEFORM OR REMOVE ANY OF THE PRONGS
FROM THE POWER CORD. DO NOT USE WITH
AN EXTENSION CORD.
IMPORTANT SAFETY INSTRUCTIONS
Ensure proper
ground exists
before use
Installation Instructions
ELECTRICAL
REQUIREMENTS
Product ratin g is 120 volts AC, 60 Hertz, 15 amps an d
1.6 kilowatts. Th is product must be con nected to a
Th e power supply cord and plug should be brought to a
th e prevailing local code for th is kilowatt ratin g.
th e requiremen ts of th e National Electrical Code or
voltage and frequen cy. Wire size must conform to
seperate and dedicated supply circuit of th e proper
seperate and dedicated 20 ampere branch
Nation al Electrical Code or th e prevailing local code.
by a qualifed electrician an d con form to the
Th e outler box and supply circuit should be in stalled
be located in th e cabinet above th e microwave oven .
circuit single grounded outlet. Th e outlet box should
EN-3
Loading ...
Loading ...
Loading ...