Loading ...
Loading ...
Loading ...
Attach the microwave oven to th e top cabin et.
Installation Instructions
3
MOUNT THE MICROWAVE
OVEN
B6.
FOR EASIER INSTALLATIO N AND PERSO NAL
SAFETY, WE RECOMMEND TH AT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
NOTE: If your cabinet is metal, use the nylon
grommet aroun d th e power cord hole to preven t
cuttin g of th e cord.
NOTE: We recommen d using filler blocks if the
cabinet front han gs below th e cabinet bottom shelf.
IMPORTANT: If filler blocks are not
used, case damage may occur from
overtightening screws.
Insert a self-aligning screw th rough top cen ter
cabinet h ole. Temporarily secure th e oven by
turn ing the screw at least two full turns after the
th reads have engaged. ( It will be completely
tighten ed later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mounting flush to bottom of cabinet.
8
7
5
Cabinet Front
Cabinet Bottom Shelf
Tigh ten the outer two screws to th e top of the
microwave oven . ( Wh ile tightenin g screws, hold
th e microwave oven in place again st the wall an d
th e top cabin et.)
Filler Block
M icrow ave Oven Top
Equivalent
to Depth
of Cabinet
Recess
Insert 2 self-align ing screws
th rough outer top cabinet
holes. Turn two full turns on
each screw.
packed with th e microwave.
Self-Aligning Screw
4
2
Rotate front of oven
up again st cabinet
bottom.
NOTE: When mounting the
microwave oven , th read
power cord th rough h ole in
bottom of top cabinet. Keep
it tigh t through out Steps
1–3. Do n ot pinch cord or
lift oven by pulling cord.
Lift microwave, tilt it
forward, an d hook
slots at back bottom
edge onto four lower
tabs of mounting
plate.
1
Install grease filters. See th e Use &&&&and Care
IMPORTANT: Do not grip or use the handle
or heat shield during installation. Do not
remove the cardboard spacers between the
heat shield and door.
EN-19
Loading ...
Loading ...
Loading ...