Loading ...
Loading ...
Loading ...
5.1 GENERAL SAFETY INSTRUCTIONS
WARNING: READ and UNDERSTAND this instruction booklet completely before using these
sprayers.
The user must always ask the dealer for the safety card of the chemical product to be
used, also for disposal of the residual liquid. The use of substances not in conformity with
the current regulations is at the user’s risk and peril.
Note: After use, rinse the container then operate the pump with clean water to completely empty
the container and piston.
5. HEALTH AND SAFETY INFORMATION
- 6 - - 11 -
Never open the pump when under
pressure.
Do not leave the sprayer exposed to
heat sources or intense cold.
Do not use for spraying food products
(wine, milk, etc.).
Variable spray nozzle.
Use suitable protective clothing
during use.
Use suitable face mask and eye
protection.
Do not eat, drink or smoke during use.
Do not spray on windy days.
Wash hands and face after use.
Keep out of the reach of children.
Keep bystanders away whilst
using the sprayer.
Seek medical attention if spray
gets in eyes, or if other symptoms
develop during spraying.
Never abandon potentially hazardous
chemicals in the environment,
drainage or sewerage systems.
Do not spray toxic or harmful liquids
on persons, animals or foodstuffs.
8. ASSEMBLY
FIG.9
FIG.10
FIG.11
FIG.12
8.3 LANCE ASSEMBLY – FIGS. 9 – 10
– If not already in place, make sure the rubber
gasket $and compression fittings %
and &are arranged onto the lance in
the correct order, as shown in FIG.9.
– Slide the the end of the lance into the trigger
assembly .
– Screw the compression fitting &to secure
the trigger and lance.
8.4 NOZZLE ASSEMBLY – FIG. 11
– If not already in place, make sure the rubber
gasket 'and compression fitting (are
in place on the end of the lance.
– Slide the nozzle onto the end of the
lance.
– Tighten the compression fitting to secure the
nozzle in place.
8.5 ATTACHING THE HOSE – FIG. 12
– If not already in place, make sure the rubber
seal )is in situated on the hose inlet
.
– Insert the suction tubing of the hose
into the spray bottle through the hose
inlet .
– Screw the compression fitting *to secure
the hose in place.
)
*
$%&
&
' (
Loading ...
Loading ...
Loading ...