Loading ...
Loading ...
Loading ...
4. INTRODUCTION
4.1 SCOPE
Special EPDM seals and gaskets material allows for use with high temperature water, glycol,
detergents, acid, organic and inorganic bleaching agents and hydraulic oils.
4.2 SPECIFICATION
Stock No’s ....................................................... 82460 .............................................................. 82583
Part No’s.................................................EWS-10-EPDM/B...................................... EWS-12-EPDM
Bottle capacity................................................... 10L .................................................................... 15L
Working capacity................................................ 8L ..................................................................... 12L
Max working pressure ......................................40psi................................................................ 40psi
Weight (empty sprayer only)...........................1.181kg.......................................................... 3.960kg
- 5 -
- 12 -
9. OPERATION AND USE
FIG.13
FIG.14
FIG.15
FIG.16
9.1 FILLING THE SPRAY BOTTLE –
FIGS. 13 – 15
– Unscrew the pump handle anti-clockwise
to loosen and remove from the pump
handle/assembly from the fill inlet .
– Fill the spray bottle with your chosen liquid
to the desired level through the fill inlet .
Note: Whilst the fill inlet incorporates a flanged
rim to help avoid spillages, the additional use of
a large funnel +may be adviseable,
especially when using potentially hazardous
liquids.
– Replace the pump handle/assembly and
screw anti-clockwise to close.
9.2 PRESSURISATION – FIG. 16
Working spraying pressure is achieved by
pumping the handle approximately 30 times.
Note: Try to avoid overfill with either air or
liquid. Air will bleed from the safety pressure
valve if the pressure exceeds 2.5bar. (see the
following section for more information).
+
×30
Loading ...
Loading ...
Loading ...