Loading ...
Loading ...
Loading ...
3. GUARANTEE
3.1 GUARANTEE
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact:
Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or:
Product Helpline (023) 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months
from the date of purchase except where tools are hired out when the guarantee period is 90 days
from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee
does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless
or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other
than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be
quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
- 4 - - 13 -
9. OPERATION AND USE
FIG.17
FIG.18
FIG.19
FIG.20
9.3 SAFETY PRESSURE VALVE
– FIG. 17
The safety pressure valve will open when
the pressure exceeds 2.5bar. It can also be
opened manually to vent remaining pressure
prior to opening.
– To open the valve manually, pull up on the
valve to release pressure.
9.4 SPRAY OPERATION – FIG. 18
The sprayer is operated by depressing the
trigger .
– For continuous spraying pull the metal
locking catch forward and locate onto
the plastic lug, locking the trigger in the
open position.
Note: Stock No.82460 incorporates a slightly
different mechanism in it’s trigger assembly.
9.5 FLOW RATE – FIG. 19
The force of the spray can be regulated using
the flow adjustment dial located on the
trigger assembly.
– Turn the dial anti-clockwise for increased
flow rate and clockwise to decrease the flow
rate.
9.6 VARIABLE SPRAY PATTERN –
FIG. 20
The spray pattern can be varied by rotating the
nozzle .
– The sequence of spray patterns varies from
fine jet, through to wide fan.
Loading ...
Loading ...
Loading ...