Loading ...
Loading ...
Loading ...
Page 38 of 64
3.3.5 Glass Installation / Installation de verre
Step 1.
Sprinkle burner channel with glass. Make sure to cover the burner pan evenly. Then add decorative
rocks to outer pan area. / Saupoudrer le canal du brûleur avec verre. Assurez-vous de couvrir la
casserole du brûleur de façon égale. Puis ajoutez les roches décoratives à la zone pan extérieur.
Step 2
Make sure that only the glass covers the burner holes. / Assurez-vous que seul le verre recouvre les
trous du brûleur.
Install the door see instructions below. Replace lower access strip in front of door / Installez la porte
voir les instructions ci-dessous. Remplacer la bande inférieure d'accès en face de la porte
Turn your fireplace on and wait approximately 10-15 minutes until the flames are a nice yellow colour.
Note the flame pattern and in any low or high areas adjust the amount of river glass to correct gas
flow.
WARNING
AVERTISSEMENT
YOU MUST WEAR FLAME AND HEAT RESISTANT GLOVES FOR THESE ADJUSTMENTS.
VOUS PORTER DES GANTS DE FLAMME ET RESISTANT A LA CHALEUR DE CES
AJUSTEMENTS.
CAU TION
ATTENTION
Burn medium positions are critical to the safe and clean operation of this appliance.
Never add any other material into the firebox. Use only with burn medium supplied
with this unit.
Burn positions moyennes sont critiques pour le fonctionnement sûr et propre de cet
appareil. Ne jamais ajouter d'autres matériaux dans le foyer. Utilisez uniquement
graver moyen fourni avec cet appareil.
This shows positions of media critical
to correct flame pattern.
Loading ...
Loading ...
Loading ...