Loading ...
Loading ...
Loading ...
USE INSTRUCTION 6
CLEANING OF THE KETTLE
CLEANING METHOD
The kettle body and base cannot be cleaned by putting them into water.
To extend the service life of kettle, the mineral sediment inside the kettle should
be cleaned on regular basis. Before cleaning, it is required to disconnect from power and ensure the
kettle has cooled down.
Do not clean the inside of the kettle or its outside surface with steel wire or
chemical detergents.
1. Fill the kettle with 0.5 liter of edible white vinegar and soak it for more than 1 hour.
2. Pour out the vinegar from the kettle and clean the residual sediment with a wet
cloth.
3. Fill the kettle with water, boil it and then pour out the water. Rinse the kettle with clean water 4 or
5 times. The kettle can then be used as normal again.
4. If necessary, repeat the above operation several times.
5. The outside of kettle can be wiped with a damp cloth.
6. Only boil the amount of water that you need. Too much water may cause unnecessary waste.
7. If the kettle is not used for long periods, pour out the remaining water and leave
the kettle to dry.
8. Ensure the outside of the kettle and the plug and socket are dry before use.
Loading ...
Loading ...
Loading ...