How to connect
MX Master comes pre-paired with a Unifying receiver. (You can also pair the mouse with any
other Unifying receiver.)
Use Bluetooth Smart wireless to connect MX Master to any Bluetooth® Smart Ready computer.
To connect with the pre-paired Unifying receiver
1. On the mouse, press the Easy-Switch button to select a channel.
2. Press the Connect button.
3. On the computer, plug the Unifying receiver into a USB port.
4. Upon pairing, the selected channel light on your mouse stops blinking and remains steady
for 5 seconds.
The computer stays connected on this channel unless you connect it to a different channel or use
the channel to set up a different connection.
A slowly blinking light means the mouse was unable to complete the connection.
To connect with Bluetooth Smart technology
1. On the mouse, select a channel.
2. Press the Connect button.
3. Complete the pairing on your Bluetooth Smart Ready computer.
List of Bluetooth Smart Ready devices:
Mac OS X
4. Open System Preferences and click Bluetooth.
5. Select MX Master in the Devices list and click Pair.
Follow the onscreen instructions to complete the pairing.
Upon pairing, the selected channel light on your mouse stops blinking and remains steady for 5
seconds.
Windows 8
4. Go to Settings and click PC and Devices.
5. Select Bluetooth.
6. In the list of Bluetooth devices, select MX Master and click Next.
7. Follow the onscreen instructions to complete the pairing.
Upon pairing, the selected channel light on your mouse stops blinking and remains steady for 5
seconds.
ADD DEVICES
After making an initial connection, set up other computers on the remaining channels using
either Unifying or Bluetooth Smart. MX Master connects with up to three devices.
SELECT CHANNELS (AND DEVICES)
After setting up connections with up to three computers, switch among them by selecting the
channel on which the desired device is connected.
Press the Easy-Switch button to cycle through the three channels. When a channel is selected, the
channel number is lit.
To select a Channel
1. On the mouse, press the Easy-Switch button.
2. When the connection is active, the channel light remains steady for 5 seconds.
The backlit channel number provides information about the connection.
If the light is...
MX Master is...
Steady
Connected
Blinking (fast)
Discoverable ...
Blinking (slow)
Pairing
