Loading ...
Loading ...
Loading ...
Connect the water line to the refrigerator.
1) Slip the compression nut through the provided
plastic tubing.
2) Tighten the compression nut onto the 1/4"
compression fitting.
J_
(_= Do not overtighten the compression nut. o,- _,
NOTE ," ,
• Using Copper Tubing
- Slip the compression nut and ferrule on
copper tubing as shown.
• Using Plastic Tubing
- Insert the molded end of the plastic tubing
into the compression fitting.
3) Tighten the compression nut onto the com-
pression fitting.
4) Turn water on and check for any leakage.
C_
NOTE
Ferrule
Refrigerator
d),° _Compresslon Nut (1/4")
, ', (Provided)
t "
m
=
---_Compression Fitting
, (Provided)
"It
i
m
CompressionNut(1/4")
(Purchased)
PlasticTubing
CopperTubing (Purchased)
(Purchased)
I Household Water Line]
Waterline must be €onnected tO drinkable water only.
Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.
(Case 2)
Check the water supply line
Connect the water pipe with coupler and tap.
- Close the main water tap.
- Connect coupler "A" to the tap.
- Every joint should be protected with sealing tape.
The water line must be connected
to the cold water pipe.
If # is connected to the hot water
pipe, it may cause the
purifier to malfunction.
COUPLER "A"
!f the Coupler does not fit on the cur[ent tap, go
the nearest authorized service dealer and purchase
the dght c0upler fittings,
TAP
Connect the water line to the refrigerator.
- Remove the compressor cover of the refrigerator. WATERLINE
- Connect the water line to the valve, as shown in the figure.
- When connected, check if there is any leakage.
If any, repeat the connection.
- Reattach the compressor cover of the refrigerator.
CONNECTIONNUT
33
COMPRESSORCOVEROF
REFRIGERATOR
Loading ...
Loading ...
Loading ...