100517 User Manual

Loading ...

1. Insert the USB Drive with your workout data into a device connected to the internet.

2. Sign in to the Schwinn Connect™ website at www.schwinnconnect.com, or create a new account. To create a new

account, click on the “Create New Account” button.

3. Click on the Options tab in the upper left corner of the web page and select “Upload workout”.

4. Click on “Select Data File” and locate your USB Flash Drive.

5. Selecttheworkoutdatale,andclicktheOpenbutton.

6. Now click on the “Upload Data File” button. Your workout data will upload into your account

7. Toreviewyourworkout,clicktheOptionstabandselect“Home”.

8. To sync your workout data with MyFitnessPal

or Under Armour

Connected Fitness programs, select the Options tab

and select the “Connected Services“ option.

9. Click on the desired program option and login with your information.

Note: The Schwinn Connect™ website will automatically sync your workouts after the initial syncing.

An information and common questions guide for the Software App can be found online at

www.schwinnconnect.com/support/.

Remote Heart Rate Monitor

MonitoringyourHeartRateisoneofthebestprocedurestocontroltheintensityofyourexercise.ContactHeartRate

(CHR) sensors are installed to send your heart rate signals to the Console. The Console can also read telemetry HR

signals from a Heart Rate Chest Strap Transmitter that operates in the 4.5kHz - 5.5kHz range.

Note: The heart rate chest strap must be an uncoded heart rate strap

from Polar Electro or an uncoded POLAR

compatible model.

(Coded POLAR

heart rate straps such as POLAR

OwnCode

chest straps will not work with this equipment.)

If you have a pacemaker or other implanted electronic device,

consult your doctor before using a wireless chest strap or other

telemetric heart rate monitor.

NOTICE: To prevent interference with the telemetry HR receiver, do not

place any personal electronic devices in the left side of the media

tray.*

Contact Heart Rate Sensors

Contact Heart Rate (CHR) sensors send your heart rate signals to the Console. The CHR sensors are the stainless steel

parts of the Handlebars. To use, put your hands comfortably around the sensors. Be sure that your hands touch both the

topandthebottomofthesensors.Holdrm,butnottootightorloose.Bothhandsmustmakecontactwiththesensorsfor

the Console to detect a pulse. After the Console detects four stable pulse signals, your initial pulse rate will be shown.

Once the Console has your initial heart rate, do not move or shift your hands for 10 to 15 seconds. The Console will now

validatetheheartrate.Manyfactorsinuencetheabilityofthesensorstodetectyourheartratesignal:

• Movement of the upper body muscles (including arms) produces an electrical signal (muscle artifact) that can interfere

with pulse detection. Slight hand movement while in contact with the sensors can also produce interference.

• Calluses and hand lotion may act as an insulating layer to reduce the signal strength.

INCLINE

Loading ...

User Manual - Page 29