Loading ...
Loading ...
Loading ...
8
Preparing the unit for window Installation
Please follow all installation instructions to avoid personal injury or damage. It is important that you save all original
packaging materials in case you need to safely transport your air conditioner. Packaging materials must be stored
away from children and in a safe manner.
Note: The unit must be installed rmly and securely to prevent excessive noise and vibration.
Removing Air Conditioner from Cabinet
1. Pull down the front grill and remove the lter. (Figure 1)
2. Lift the front grill upwards to remove it and place it to the side.
3. Remove the four front screws. These will be needed to re-install the front panel. (Figure 2)
4. Push both sides of the metal cabinet to release the plastic tabs on each side of the front panel. (See Figure 3)
5. Lift the front panel o of the unit. (Figure 3A)
6. Disconnect the plug connecting the display panel to the unit and place the front panel to the side. (Figure 4)
7. Take out the shipping screws from the top and sides of the unit, if present. (Figure 5)
8. Hold the cabinet while pulling on the base pan handle, and carefully remove the unit.
9. Cover the two holes where the shipping screws were removed at the top of the unit with foam inserts. (Figure 6)
10. If the unit comes with internal packaging it must be removed prior to installing the air conditioner back into
the cabinet. (Figure 7)
Loading ...
Loading ...
Loading ...