Loading ...
Loading ...
Loading ...
10
Installing Unit into Window
5. Insert the bottom of the side curtain housing into the bottom channel on the air conditioner as shown below:
6. Insert 2 7/16” locking screws (with washers) into the holes located on the top leg of the window curtain frame.
Do not tighten fully; the leg should slide freely. These will be tightened later in the installation.
Note: When choosing your window, make sure the power supply cord is within four (4) feet of a
grounded 3-prong outlet.
Follow the steps listed below to install the air conditioner into the window.
1. Center empty cabinet into window:
• Check that lower rail of air conditioner cabinet is behind and against the back side of the window sill.
• Measure the distance between the right and left sides and adjust until the distance is equal.
2. Bring the window down temporarily, behind the top channel, to hold the cabinet in place.
3. Fasten the cabinet to the window sill by inserting two ¾” (or ½” for some models) hex-headed screws into the
holes in the bottom of the cabinet. (The user may want to pre-drill pilot holes into the window sill.)
4. Place the bottom rail foam gasket over the screws to cover the window sill.
Bottom View:
A: Curtain Housing
B: Curtain Top Channel
Loading ...
Loading ...
Loading ...