Koldfront WAC18001W 18,500 BTU 208/230V Heat/Cool Window Air Conditioner

Owner’s Manual - Page 14

For WAC18001W. Also, The document are for others Koldfront models: WAC25001W

PDF File Manual, 24 pages, Read Online | Download pdf file

WAC18001W photo
Loading ...
Loading ...
Loading ...
14
Additional Tips:
To Use the Timer (Auto Start/Stop) Feature:
Setting an Auto Start:
While the unit is o, press the Timer button ONCE. The timer on indicator will illuminate. You then have 3-5
seconds to set the start time. Use the Up or Down buttons to change the time by 1/2 hour increments up to 10
hours or 1 hour increments up to 24 hours. The selected time will display for 5 seconds and then revert to the
previous display.
Setting an Auto Stop:
While the unit is o, press the Timer button TWICE. The timer o indicator will illuminate. You then have 3-5
seconds to set the stop time. Use the Up or Down buttons to change the time by 1/2 hour increments up to 10
hours or 1 hour increments up to 24 hours. The selected time will display for 5 seconds and then revert to the
previous display.
Turning the unit on or o at any time, or adjusting the timer setting to 0.0 will cancel the timer program.
Note: Heat function is intended to provide supplemental heating in addition to an existing
heat source. The heat funciton has a lower BTU rating than the cool mode and therefore does
not treat the same quare footage. The maximum heating capacity of the unit is 15° F above
the ambient room temperature
When the unit is set to “Heat” mode, it will heat the room to maintain the desired set temperature.
When the desired temperature is reached, the unit will automatically maintain the temperature.
The fan speed is not adjustable in heat mode
Dry Mode:
• In this mode, the air conditioner will operate as a dehumidier. Because the conditioned space is closed or sealed,
some degree of cooling will continue to occur.
The fan speed is set to Low automatically.
Heat Mode:
• Displays the set temperature in °C or °F and the Auto-Timer settings. While operating in Fan Only mode, it shows
the current room temperature.
To switch between °C and °F, press and hold the Up and Down Temp and Timer buttons at the same time for three
(3) seconds.
Digital Display:
If power to the unit is interrupted, the air conditioner will restart itself in its last used mode and settings once
power is restored. The compressor will restart after 3 minutes.
Auto-Restart:
Loading ...
Loading ...
Loading ...