Loading ...
Loading ...
Loading ...
Command pads
The command pads tell the oven what to do and in
what order. Some command pads have an Indicator
Light. The Indicator Light comes on when you press
the command pad. The ON Indicator Light comes on
when you press START/ENTER for an oven function.
Using the control lock
The control lock prevents unwanted use of the oven by
disabling most of the control panel command pads
(except CLOCK, TIMER SET, TIMER OFF, and LIGHT).
NOTES:
• Control lock is only available when oven is not in
use or control has not been set.
• Set control lock when cleaning the control panel to
prevent oven from accidentally turning on.
To lock or deactivate the control panel:
Press and hold START/ENTER for 5 seconds. A single
tone will sound and "Loc" and _ will
appear on the temperature display. When
the control is locked, only the clock, timer,
and oven light will operate.
To unlock the control panel:
Press and hold START/ENTER for 5 seconds. A single
tone will sound and "Loc" and 1°1will
disappear from the temperature display.
1. PRESS YOU SEE
(last time of day remembered)
2. Set time.
Press the "up" (A) or "down" (V) pad(s) until the
correct time shows on the display.
PRESS YOU SEE
8B
(example for 5:30)
YOU SEE
To shut off all signals except for error tones, timer
reminder tones and the hidden function signal:
Press and hold STOP TIME for 5 seconds. A short
tone will sound to tell you the signals have
been changed. Repeat the above step to
turn the signals back on.
To choose between high and low volume signals:
Press and hold DELAY START TIME for 5 seconds. A
short tone will sound to tell you the signals
have been changed. "Snd" and "HI" and
"Snd" and "LO" will appear on the time
display to show the volume you chose. If the
volume is changed while the audible signals
are off, then signals are turned back on at the volume
setting chosen.
Disabling the clock display:
If you do not want the clock time displayed, press and
hold CLOCK for 5 seconds. To display the clock time
again, press and hold CLOCK for 5 seconds. You
should not have to reset the time.
Loading ...
Loading ...
Loading ...