1. Home
  2. Summit
  3. Summit TDC112C User Manual
  4. Page 26

Summit TDC112C Condensing Dryer

User Manual - Page 26

For TDC112C.

PDF File Manual, 40 pages, Read Online | Download pdf file

TDC112C photo
Loading ...
Loading ...
Loading ...
Fault indicators
In the case of a fault the following fault indicators are shown on the display.
Troubleshooting
S3
J1 DISPLAY
S2
S1
Display Cause Action
Over flow fault, Overflow
Fault, Over flow fault,
Överfyllnad, Overløbsfejl,
Overflom, Ylitulviminen,
Trop plein, Überlauf,
Troppo pieno, Desborde,
Пeрeлив вoды, Te veel
water
The microswitch is opened when a
full condensed water tank is detected.
Detection begins 30 seconds after the
programme starts. If the microswitch is
open >30 seconds the programme cycle
is stopped.
Check whether the customer has:
•฀Emptied฀the฀tank฀and฀restarted฀the
machine.
Service action:
•฀Clean฀hoses฀and฀check฀voltage฀and฀
resistance of drainage pump.
•฀฀Check฀that฀the฀oat฀has฀not฀got฀
“stuck” and check the function of the
microswitch.
The auto filter is clogged, defective or
the auto filter/sealing is improper fitted.
Check whether the customer has:
•฀Cleaned฀the฀auto฀lter฀and฀installed฀the
auto filter/sealing properly.
Service action:
•฀Replace฀the฀auto฀lter฀and/or฀the
sealing.
HP (heat pump)
Defective or improper installed anti-
siphon valve.
Service action:
•฀Clean฀the฀hose฀and฀replace฀the฀
anti-siphon valve.
The reversing valve is clogged or
defective.
Service action:
•฀Clean฀the฀auto฀lter฀and฀replace฀
the anti-siphon valve.
Hoses improper installed after service. Service action:
•฀Check฀hose฀installation.
Max Program Time,
Max program time ,
Maximal programtid,
Maksimal programtid,
Maks programtid, Max
ohjelma-aika, Durée maxi
prog., Tijd overschreden,
Tempo max. progr.,
Duración máx prog,
Пpeвышeниe вpeмeни,
Max. Programmzeit
The programme cycle time exceeds 200
minutes. The cycle is stopped and the
programme is reset.
High ambient temperature combined
with low heater output and low
drying temperature leads to poor
condensation formation.
Poor condensation due to blocked
external air
Check whether the customer has:
•฀Tried฀spinning฀at฀a฀higher฀
speed.
•฀฀Had฀the฀machine฀switched฀off฀for฀30฀
minutes before restarting.
•฀Good฀ventilation฀in฀the฀room.
Service action:
•฀Ensure฀that฀the฀external฀air฀has฀free
passage.
Service Manual TD70.C
26
Loading ...
Loading ...
Loading ...