Loading ...
Loading ...
Loading ...
- 9 -
2. Install (2) M6 x 60 lag bolts with (2)
12.5 mm washer on each into the
keyslot holes drilled in Step 1. Do not
tighten bolts. Fig. 6.
3. Mount the telescopic arm. Attach with
the installed (2) M6 x 60 lag bolts -
mount the two key hole slots and
rotate arm. Make sure the arms are
perpendicular to the ceiling. Tighten
(2) lag bolts. Fig. 7.
4. Attach the remaining four (4) M6x60
lag bolts per arm. Fig. 7.
5. Temporarily install the ceiling canopy
and attach with (2) M4 x 20 large
head torx drive screws. (You will need
to remove it when making electrical
connections.) Fig. 8.
Fig. 6
Fig. 7
M6X60
LAG
BOLTS
(DO NOT
TIGHTEN)
12.5 MM
WASHERS
Fig. 8
M6X60
LAG
BOLTS
M4X20 LARGE
HEAD
TORX DRIVE
SCREWS (2)
Loading ...
Loading ...
Loading ...