Loading ...
Loading ...
Loading ...
TREK comes equipped with 3 different power options for when you’re at
home or on-the-go camping or tailgating. Connect your grill following 1 of
the 3 power options displayed below. Make sure to keep your cords safe
from rain or weathering.
VERY IMPORTANT:
Install the grease tray with the half-moon cut-out to the left
side of the grill near the thermal sensor. This ensures proper
travel of grease into your grease trough. For easy clean up,
use our Drip EZ Grease Tray Liners or wrap the grease tray
in tin foil. MAKE SURE not to cover up the cut-out on the
left side near the thermal sensor.
Half-moon Cut-out
Once the grill is plugged in, the display will read
off. Press the red power button to turn the unit
on so it reads 0.
Once the unit hits number 1 on the screen, unplug
the unit from the back and plug it in again. The unit
should read off on the screen.
Now press the red power button again to restart the
grill. The unit will go through the 0-1- 2-3 process
and will heat up to 150°F.
This procedure is a way to ensure the auger feeds pellets and primes the firebox.
Once your grill has reached 150°F you can then
adjust to your desired temperature.
HEAT SHIELD
RECOMMENDED POSITIONING OF
BEFORE YOU SET UP YOUR GRILL, MAKE SURE THE BACK AND SIDES OF THE GRILL ARE AT LEAST 24 INCHES FROM ANY
COMBUSTIBLES, AND THERE IS AT LEAST 48 INCHES OF CLEARANCE BETWEEN THE TOP OF THE CHIMNEY CAP AND ANY
COMBUSTIBLE MATERIALS ABOVE THE GRILL. PLEASE READ AND FOLLOW THE SAFETY INFO SECTION BEFORE
STARTING YOUR GRILL.
13 14
Half-moon
Cut-out
PREFIRE CHECK OPERATING YOUR GRILL
GREASE TRAY
REQUIRED INSTALLATION OF
GRILL 3 POWER OPTIONS
PLUGGING IN THE
FIRST STARTUP
IMPORTANT STEPS FOR
PROPER AIRFLOW
HOW TO ENSURE
IMPORTANT! For proper heat shield positioning, use the marks on the adjuster handle. The grill wall should align with the
-0.5 mark on the handle, setting the heat shield roughly 4 in. from the left inside grill wall.
HEAT SHIELD ADJUSTER
2 1 0 1 2
SWEET SPOT
-0.5
ALWAYS CLOSE HOPPER LID ALWAYS LEAVE CHIMNEY CAP OPEN
4 in.
DO NOT over tighten the adjustment rod.
ONLY perform these steps on the very first startup
or to fill the auger and recharge the firebox if the
grills runs out of pellets during a cook.
PRESS
ONCE
PRESS
ONCE
DC POWER CORD
WALL OUTLET
VEHICLE
12V BATTERY
12V POWER CORD
12V POWER CORD
+
BATTERY
ALLIGATOR CLIPS
Loading ...
Loading ...
Loading ...