Loading ...
Loading ...
Loading ...
MAINTENANCE
I
MAINTENANCE SCHEDULE _#,__/_/_'o_/_o_ _, _
FILLIN DATES /__j:_Xx_'_,p_/_._dP"
ASYOU COMPLETE f_/_._._,_ "O_OR'_"
REGO RSE.V,CE / JSERV'OE
DATES
Check BrakeOperation _
CheckTire Pressure
CheckOperatorPresenceand
TR InterlockSystems
Checkfor LooseFasteners V's I_
CA Sharpen/ReplaceM°wer Blades ;_3
; LubricationChart I_
T CheckBatteryLevel i_4
R CleanBatteryandTerminals II_
I CheckTransaxleCooling I_
CheckV-Belts I_
CheckEngineOil Level I1_
ChangeEngineOil (withoilfilter) 11_1,2 V'
E ChangeEngineOil (withoutoilfilter) 1_,2 ll_
N CleanAirFilter 1_2
G CleanAirScreen Ibm2
I InspectMuffler/SparkArrester
N
E Replace Oil Filter (If equipped) _.2
CleanEngineCoolingFins _ 2
ReplaceSparkPlug _ I1_
ReplaceAirFilterPaperCartridge
ReplaceFuelFilter
1 - Change more often when operalJng under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
3 - Replace blades more often when mowing in sandy soil
4 - Not required if equipped with maintenance_free battery.
5 - Tighten front axle pivotbolt to 35 ft.-Ibs, maximum.
Do not overtighten.
LUBRICATION CHART
The warranty on thistractor does not cover itemsthat have
been subjected tooperatorabuse or negligence. To receive
full value from the warranty, operator must maintain tractor
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tractor.
At least once a season, check to see if you should make
any of the adjustments described in the Service and
Adjustments section of this manual.
• At least once a year you should replace the spark
plug, clean or replace air filter, and check blades and
belts for wear. A new spark plug and clean air filter
assure proper air-fuel mixture and help your engine
run better and last longer.
BEFORE EACH USE
Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlocksystems for proper operation.
• Check for loose fasteners.
OSPII
ZERK t-7,-, ZERK
OFRONTWHEEL _ z "C)FRONTWHEEL
BEARING ZERK BEARING ZERK
_)ENGINE
(i)GENERAL PURPOSE GREASE
_REFERTO MAINTENANCE "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS WHICH
HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRICANTS WILL
ATI-RACT DUST AND DIRT THAT WILL SHORTEN THE LIFE OF
THE SELF-LUBRICATING BEARINGS. IF YOU FEEL THEY MUST
BE LUBRICATED, USE ONLY A DRY, POWDERED GRAPHITE TYPE
LUBRICANT SPARINGLY.
16
Loading ...
Loading ...
Loading ...