Loading ...
Loading ...
Loading ...
Playback
[ENGLISH ]
÷ The MEMORY function works in both CAM and PLAYER modes.
÷ You can mark a pointon a tape that you want to return to following playback.
1. Press the ZERO MEMORY button on the remote control during playback or recording at the pointyou wish to return to.
• The time code is changed to a tape counter that is set to zero memory with the [] 0:00:00(Zero memory indicator)
• If you want to cancel the zero memory function, press the ZERO MEMORY button again.
2. Findingthe zero position.
• When you have finishedplayback,fast forward or rewind the tape.
- The tape stops automatically when it reaches the zero position.
• When you have finished recording, press the powerswitch on the PLAYER and pressthe 44 (REW) button.
- The tape stops automatically when it reaches the zero position.
3. The tape counter with the [] (Zero memory indicator) disappears from the display and the tape counter is
changed to the time code.
• In the following situations, ZERO MEMORY mode may be canceled automatically:
- At the end of the section marked with the ZERO MEMORY function.
- When the tape is ejected.
- When you remove the battery pack or powersupply.
• The zero memory may not function correctly where there is a break between recordingson the tape.
,,&
Loading ...
Loading ...
Loading ...