Loading ...
Loading ...
_ENGLISH ]
Notices and Safety Instructions
9. VENTILATION:
Slots and openings in the cabinet are provided for ventilation to
ensure reliable operation of the CAMCORDER and to protect it
from overheating. These openings must not be blocked or
covered. Never place your CAMCORDER on a bed, sofa, rug,
or other similar surface: on or near a radiator or heat register,
This CAMCORDER should not be pieced in a built-in installation
such as a bookcase or rack unless proper ventilation is provided
or the manufacturer's instructions have been adhered to.
10. POWER SOURCES:
The CAMCORDER should be operated only from the type of
power source indicated on the label.
If you are not sure of the type of power supply at your home,
consult your appliance deaIer or local power company.
A CAMCORDER is intended to be operated from battery power,
or other sources, refer to the operating instructions.
I1. GROUNDING OR POLARIZATION:
This CAMCORDER may be equipped witheither a polarized
2-wire AC line plug (a plughaving one blade wider than the other)
or a 3-wire grounding type plug,a plug having a third (grounding)
pin.
If you are unableto insert the plugfully into the o_:let, try reversing
the plug. ifthe plug still fails to fit, contact your electrician to
replace your outlet. Do not defeat the safety purposeof the
poiarizedplug.
13. OUTDOOR ANTENNA GROUNDING:
Ifan outside antenna or cable system is connected to the
CAMCORDER, be sure the antenna or cable system is grounded
to providesome protectionagainst vogage surges and built-up
static charges, Section 810 of the National Electrical Code,
ANSI/NFPA No. 70-1984, provides information with respect to
propergrounding of the mast and supporting structure, grounding
of the lead-inwire and supporting structure, grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding to conductors, location
of antenna-discharge unit, connection to grounding electrodes
and requirements for the grounding electrode,
See figure below,
Wll_
_ii'_iiiiiiii_ii_i_ , .......
12. POWER=CORDPROTECTION:
Power-supply cords should be routed so that they are not likely to
be waIked on or pinched by items placedupon or against them,
payingparficular attention to cords or plugs, convenient
receptacles, and the point where they exit from the unit,
Loading ...
Loading ...
Loading ...