Loading ...
Loading ...
Loading ...
- 10 -
3. Clean the filter as described in the following section.
4. When the unit will not be used for a long time:
1) Empty and dry the water tank, and then install it back.
2) Clean the filter.
3) Place the appliance upright and avoid the direct sunlight.
Filter
There is a filter net inside the appliance that must be removed and cleaned regularly. The dehumidity capacity
may reduce when the filter net is clogged with defilement.
Remove the filter net, detach the net (A) and filter case (C) to take out the activated carbon layer (B).
The net and filter case can be washed in water (temperature < 40°C). Dry well before installation.
The activated carbon layer cannot be cleaned in water. You may use a vacuum cleaner to remove the dust.
It is recommended that the activated carbon layer (B) be replaced every 3-6 months (depending on usage) to
ensure peak performance of the appliance.
TROUBLE SHOOTING
Problem
Possible Cause
Solution
No working
Whether the power plug is connected
Plug in
Whether the water tank is full
Empty the water tank
Whether the water tank is in position
Place it well
Small dehumidifying
capacity
Is the filter clogged?
Clean the filter
Is the air inlet or air outlet
obstructed?
Remove the obstruction from the air outlet
or air inlet.
Big noises
Whether the appliance is placed well
Place the appliance on a smooth and stable
floor
Stop during the
dehumidifying
process
Whether the room temperature is
out of the working scope of the
appliance
The appliance may start automatically when
the room temperature returns to the
working scope 5-32
The clothing cannot
be dried fast
Whether the room temperature is
very low
The wet clothing may dry more slowly in low
temperature
Phenomenon
Intermittent stop during the
operation
Small dehumidifying capacity
The humidity of the room
cannot reduce
The room is too big
The door or windows of the room are not closed
The appliance is operated with other appliance which releases steam
Loading ...
Loading ...
Loading ...