Loading ...
Loading ...
Loading ...
- 9 -
automatically and the buzzer will beep 15 times to alert the user that the water needs to be emptied from the
water tank.
Empty the water tank
1. Pull out the water tank from the appliance.
2. Discard the collected water.
3. Install the water tank back.
NOTE:
1. When placing the water tank back, press the tank firmly into the place with both hands.
2. Do not remove the float from the water tank. The water full sensor will no longer be able to detect the water
level correctly without the float and water may leak from the water tank.
Continuous water drainage
The appliance has a continuous drainage plughole. Unplug the hole and connect the (optional available) plastic
pipe; the condensed water can be continuously drained out. Install drain piping at a downhill grade to make sure
that condensed water can be drained continuously. Now the condensed water will be drained out by this
drainage plughole instead collected into the water tank.
CLEANING AND MAINTENANCE
The appliance must be regularly cleaned to prolong its life and keep it functioning properly.
Warning: Before performing any cleaning, turn off the unit and unplug it to avoid electrical shocks. Do not use
hot water or chemical solvents for cleaning.
1. Regularly, clean the water tank with cold or warm water and dry with a soft cloth to avoid any mildew.
2. Clean the surface of the appliance using a moist cloth. Do not use detergents or abrasive sponges that can
cause damage to the plastic surface.
Loading ...
Loading ...
Loading ...