Loading ...
Loading ...
Loading ...
Cleaning & Maintenance
Unplug power cord before cleaning & maintenance of the product.
Exterior Body of Unit
• Use a soft cloth to remove stains and dirt from the unit body.
• For tougher stains, dampen cloth with water and/or use mild detergent and wipe o.
Pre-Filter (approximately twice per month)
• Clean the surface of the lter with a vacuum cleaner or wash with water.
• Allow to dry thoroughly.
Integrated (Carbon + HEPA) Filter (approximately once every two months)
• Clean dust and any visible particles from the front of the lter with a vacuum cleaner.
• Do not use water to clean this lter.
• The lter is delicate. Do not press too hard on the lter while vacuuming.
• Do not expose to direct sunlight.
UVA LED Photocatalytic Filter
• In case any dust or particles are against the grill, use a vacuum cleaner to remove.
• Make sure not to apply too much pressure.
Particulate Sensor (approximately once every two months)
• Be sure to unplug the power cord.
• Wipe the lens with a dry cotton swab periodically to remove any dirt,
moisture, or any residue as they may cause improper sensor readings.
• Do not use the cotton swap on any other area other than the surface
of the lens. Lens position: Diagonally
11
Loading ...
Loading ...
Loading ...