Loading ...
Loading ...
Loading ...
Securefrontsupporttubetotopsupportangle
usingtwo1/4"x1-1/4"hexboltsand1/4"locknuts.
TIGHTEN. Do not over tighten and collapse support
tube. See figure 18.
NOTE: Cart bag not shown for clarity.
I
/
FRONT SUPPORTTUBE
/
TOP SUPPORT ANGLE .-
1/4"x 1-1/4" HEX BOLT
FIGURE 18
Place the front support rod on the outside and the
lower support rod on the inside of the top angle
support. Attach using two 1/4" x 3/4" hex bolts and
1/4" lock nuts. TIGHTEN nut only until flush with end
of bolt. The rods must pivot freely. See figure 19.
NOTE: Cart bag not shown for clarity.
FRONT SUPPORT ROD
(STRAIGHT)
LOCK NUT
114" x 314" HEX BOLT
FIGURE 19
14
LOWER SUPPORT ROD
(BENT)
• Assemble a 1/4" x 3/4" bolt and 1/4" lock nut to each
end of the second lower support rod. TIGHTEN, then
back nut off 1/2 turn. See figure 20.
• Attach the lower support rod to the outside of the top
support angle using two 1/4" flanged nuts. TIGHTEN.
See figure 20.
NOTE: Cart bag not shown for clarity.
LOWERSUPPORT
ROD (BENT)
.-'_"''" 114" FLANGED \
\
NUT
114" LOCK
NUT
114" x 314"
HEX BOLT
FIGURE 20
Attach the braces to the front support tube using
two 1/4" x 1-1/4" hex bolts and 1/4" flanged nuts.
TIGHTEN. Do not over tighten and collapse support
tube. See figure 21.
NOTE: Cart bag not shown for clarity.
114" x 1-114"
HEX BOLT
FIGURE 21
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
Loading ...
Loading ...
Loading ...