Loading ...
Loading ...
Loading ...
Slide the second lower support rod (bent ends)
through the sleeve along the bottom of the cart cover.
Slide an end of the rope onto the end of the rod as it
approaches each gap in the sleeve. The bend in the
rod must face in the direction shown in figure 15.
Place the top support angle inside the cart cover.
Push the long plastic strip stitched to the bottom of
the cover onto three welded bolts in the top support
angle. Attach the two short plastic strips to the top
support angle using two plastic plugs as shown in
figure 17.
BOTTOM OF
CART COVER
3END
ROPE
LOWER
SUPPORT
BOTTOM SLEEVE
FIGURE 15
Locate the plastic strips that are stitched to the
bottom of the cart cover. Cut seven slits in the cover
fabric that align with the holes in the plastic strips.
See figure 16.
PLASTIC PLUG
PLASTIC STRIPS, "_
WELDED BOLT
FIGURE 17
TOP SUPPORT ANGLE
CUT SLITS (7)
PLASTIC STRIPS
FIGURE 16
Call 1-888-578-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
13
Loading ...
Loading ...
Loading ...