Loading ...
Loading ...
Loading ...
66
Connections
Connecting an Integrated Amplier (ZONE 3)
You can enjoy 2 ch audio in the separate room (ZONE 3) while performing
playback in the main room (where this unit is located). Use an analog audio
cable to connect the ZONE 3 PRE/LINE OUT jack on this unit to the input jack
on an integrated amplier in the separate room. The same source can be played
back in the main room and ZONE 3 simultaneously. Also, different sources can
be played back in both rooms.
• To output audio from an externally connected AV component to ZONE 3,
use an analog audio cable for connection. Note that ZONE 3 output is not
possible with the connection using a HDMI cable, digital coaxial cable, or
digital optical cable.
Setup
• With speaker combinations ( →p194) 2.1.2 ch, 3.1.2 ch, 4.1.2 ch, or
5.1.2 ch, this function cannot be used when using Bi-AMP or ZONE 2 (ZONE
SPEAKER). However, when a power amplier without a volume control is
connected to the ZONE 3 PRE/LINE OUT terminals, it is possible to use
ZONE 2 (ZONE SPEAKER) and ZONE 3 (ZONE SPEAKER).
• When connecting an integrated amplier that has an external volume control,
set "7. Multi Zone" - "Zone 3" - "Output Level" ( →p149) to " Fixed (Default
Value)" on the Setup menu. If your external amplier does not have an
external volume control please set this at "Variable". If you do not set this,
the volume output will be very loud and there is a danger of damage to the
integrated amplier, speakers, etc.
Note
• ZONE 3 PRE/LINE OUT cannot be used when the connected speaker
conguration is "6.1 ch", "7.1 ch", "6.1.2 ch", "7.1.2 ch", "4.1.4 ch", "5.1.4 ch",
"6.1.4 ch", or "7.1.4 ch".
Input
Terminal
a
Integrated
amplier
a Analog audio cable
BD/DVD
Loading ...
Loading ...
Loading ...