Integra DRX5.4 User Manual

Loading ...

196

Appendix

General Specications

Amplier Section North American models Australian models

Rated Output Power

With 8 ohm loads, both channels driven, from 20 Hz-

20 kHz; rated 120 watts per channel minimum RMS

power, with no more than 0.08% total harmonic

distortion from 250 milliwatts to rated output. (FTC)

9 ch × 180 W at 6 ohms, 1 kHz, 1 ch driven of 1% THD

(IEC)

Maximum Effective Output Power 250 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD

9 ch × 215 W at 6 ohms, 1 kHz, 1 ch driven of 10% THD

(JEITA)

THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz - 20,000 Hz, Rated output power)

Input Sensitivity and Impedance 200 mV/47 kΩ (LINE(RCA)), 3.5 mV/47 kΩ (PHONO MM)

Rated RCA Output Level and Impedance

PRE OUT : 1 V/470 Ω

PRE OUT(ZONE 2) : 1 V/2.2 kΩ

LINE OUT (ZONE 2, ZONE B): 200 mV/2.2 kΩ

LINE OUT (ZONE 3) : 200 mV/470 Ω

Phono Maximum Input Signal Voltage 70 mV (MM 1 kHz 0.5%)

Frequency Response 10 Hz - 100 kHz/+1 dB, –3 dB (Direct)

Tone Control Characteristics

MAIN : ±10 dB, 20 Hz (BASS), ±10 dB, 20 kHz (TREBLE)

ZONE 2 : ±10 dB, 100 Hz (BASS), ±10 dB, 10 kHz (TREBLE)

Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT), 80 dB (IHF-A, PHONO IN, SP OUT)

Supported impedance of Speakers 4 Ω - 16 Ω

Headphone Rated Output 85 mW + 85 mW (32 Ω, 1 kHz, 10% THD)

Supported impedance of Headphones 8 Ω - 600 Ω

Headphones Frequency Response 10 Hz - 100 kHz

Loading ...

Integra DRX5.4 9.2 Channel Black Network A/V Receiver