Loading ...
Loading ...
Loading ...
Installation instructions I--T1 l_
= Watersupply
This washer must be plumbed into both a hot and cold water supply or it will not work
correctly. Please ensure that both hot and cold water are connected to the washer.
If you have an uncontrolled water-heating source (eg.a wet back or solar heating)you should
have a tempering device fitted. This will ensure the hot water temperature remains within
safe limits. For the most suitable type of tempering device we recommend you contact a local
plumber or plumbing supply merchant, ; }:}
° In Jet Water Static Pressure 3psi (20kPa)to 150psi (1MPa)(ff using a header tank then the top of
the header tank must be at least 39"(2 m) above the top of your clothes washer).
° Minimum flow rate from the faucet supplying the clothes washer should be greater than _:]
1 '/2 galons/min (6 Iiters/min)(assumes W' (12.7 mm) diameter pipes).
° Minimumheight of faucetsto clearthe top of the washeris45"(1150mm).
Drai°i°g
= Regularly, check that your standpipe or set tub/sink is free from lint or other obstructions,which
may affect how your washer works or may cause flooding.
° In mukFstorey apartments or any upper floor, the washer should be installed on a drained floor.
= Draining must comply, with local by-laws, i:iJi
Clothes washer safety
. ot,e wo e , not,nten=e= yo°n =n ,e w,t,o°t
supervision, ii
= Pleasesuperviseyoungchildrentoensurethey,donotplay,withthisclotheswasher.
!It
If you are using an extension cord or a portable electrical outlet device (eg. multi-socket outlet
box), ensure that it is positioned so that it does not come into contact with water or moisture.
_essoriesa°dspareparts
Ava/aNe from your Fisher & Paykel Dealer or Authorized Service Center.
Drain Hose Extension Part No. 425627p
Power Cord Ifthe Power Cord of your clotheswasher isdamaged itmust be
replacedby a Fisher& PaykelAuthorizedServiceCenter,as it
isnot a standard power cord.
Loading ...
Loading ...
Loading ...