Loading ...
Loading ...
Loading ...
_nsta_ation instructions FT{1
Special requirements for alcove or closet installation
The minimum ventilation clearance between the washer and adjacent walls or other surfaces is:
1"(25mm) minimum either side and front
3"(75mm) minimum rear
Consideration must be given to providing adequate
clearance for installation and servicing.
The minimum vertka[ space required from floor
to overhead shelves, cabinets, ceilings etc is 59"
(1500 ram).
Closet doors must be [ouvered or otherwise
ventilated and have at least 60 square inches open
area for a washer only, or if the closet contains both
a washer and dryer, doors must contain at least 120
square inches of open area equally distributed.
F i_
! _Jl?-- 60Sq. in
(388 Sq. cm)
HI f-
(388 Sq. cm)
-- 60 Sq.
Fig. 8 Louvereddoor Wosher& Dryer
Caution!
Do not instell this epplience in e closet with e solid door.
Mobile ho me in sta[[ation
installation must conform to the STANDARD FOR MOBILE HOMES, ANSi Al19.1 and NATIONAL
MOBILE HOME CONSTRUCTDN & SAFETY STANDARDS ACT OF 1974 (PL93-383).
Grounding instructions
This appliance must be grounded. In the event of malfunction or break down, grounding will }
reduce the risk of electric shock by providing a path of least resistance for eJectrk current.
Thisapplianceisequippedwithacordthathasanequipment-groundingconductoranda
grounding plug. The plug must be plugged into an appropriate outlet that is properly installed
and grounded in accordance with aI[ local codes and ordinances, i}'
Specification subject to change without notice. 11:
Loading ...
Loading ...
Loading ...