Loading ...
Loading ...
Loading ...
26
FM Mode
Selecting FM Mode
1. Press MODE button repeatedly to select FM mode.
2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise,
the last listened FM station will be selected.
3. To manually change the FM frequency, while FM frequency shows up, turn
SELECT/SNOOZE knob clockwise or anticlockwise to change the frequency by 0.05MHz per
step.
4. To automatically scan, while FM frequency shows up, turn SELECT/SNOOZE knob
clockwise or anticlockwise and then press SELECT/SNOOZE knob, your radio will skip
forward or backward until it reached the next available station.
Scan settings
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations.
1. To change the scan settings to stop only at stations with good signal strength, press MENU
button on the unit, turn SELECT/SNOOZE knob to select Scan setting, and then press
SELECT/SNOOZE knob to confirm.
2. Display will show 'Strong stations only?', turn SELECT/SNOOZE knob to select 'YES', and
then press SELECT/SNOOZE knob to confirm.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
signal-to-noise ratio (hiss).
1. To play weak stations in mono, press MENU button on the unit, turn SELECT/SNOOZE knob
to select Audio setting, and then press SELECT/SNOOZE knob to confirm.
2. Display will show 'Listen in Mono only?', turn SELECT/SNOOZE knob to select ‘YES’, and
then press SELECT/SNOOZE knob to confirm.
Loading ...
Loading ...
Loading ...