ILve C9VF La Cornue CornuFe Series 36 Inch Ivory Dual Fuel Freestanding Range

User Manual - Page 25

For C9VF.

PDF File Manual, 48 pages, Download pdf file

Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
23
Moving the Range
The range is very heavy. Take great care.
On no account try and move the range while it is
plugged into the electricity or gas supply.
We recommend two people maneuver the range. Make sure
that the oor covering is rmly attached, or removed to
prevent it being disturbed when moving the range around.
To help you, there are two levelling rollers at the back, and
two screw-down leveling feet at the front.
Remove the polystyrene base pack. From the front, tilt the
range backwards and remove the front half of the polystyrene
base.
Repeat from the back and remove the rear half of the
polystyrene base.
Removing the Storage Drawer
Note: To avoid exterior damage to the storage drawer. Ensure
a soft cushioned mat is placed on the oor and covers the
width and depth of the storage drawer.
Pull the drawer right out.
Unscrew the two fasteners and remove the screw washers
from either side of the storage drawer runner brackets
(Fig.7.4).
For safety reasons slide the inner side rails back into the
cavity.
Lowering the Two Rear Rollers
To adjust the height of the rear of the range, rst t a 13 mm
spanner or socket wrench onto the hexagonal adjusting
nut (Fig.7.5). Rotate the nut – clockwise to raise – counter-
clockwise to lower.
Make 10 complete (360°) turns clockwise. Make sure you
lower BOTH REAR ROLLERS.
Completing the Move
Unfold the rear edge of the cardboard base tray. Get a good
grip on the top of the oven cavity panel as you move the
oven. Carefully push the range backwards o the cardboard
base. Remove the base tray.
Position the range close to its nal position, leaving just
enough space to get behind it (Fig.7.6).
Do not replace the storage drawer yet.
IMPORTANT: Remove all tape and packaging. Make sure
the burner heads are properly seated and level. Take the
accessory pack out of the oven. Check to be sure that no
range parts have come loose during shipping.
Fig.7.4
Fig.7.5
Fig.7.6
Loading ...
Loading ...
Loading ...