Loading ...
Loading ...
Loading ...
11
ArtNo.320-0023
Oven light USA
To Remove and Ret the Racks
The rack has a small kink on either side (Fig.2.21). To remove
the rack, line these up with the stops in the rack support
(Fig.2.22). Lift the rack upwards so that it will pass over the
rack stop and then pull it forwards (Fig.2.23).
Ret in the reverse order, making sure to push it fully back.
Oven Light
Press the appropriate button to turn on the oven lights.
If one of the oven lights fail, turn o the range circuit breaker
before you change the bulb. See the ‘Troubleshooting’ section
for details on how to change an oven light bulb (Fig.2.24).
Storage
The bottom drawer is for storing oven trays and other
cooking utensils.
It can get very warm, don’t store anything in it, which may
melt or catch re. Never store ammable materials in the
drawer. This includes paper, plastic and cloth items, such as
cookbooks, plastic ware and towels, as well as ammable
liquids. Do not store explosives, such as aerosol cans, on or
near the appliance.
Flammable materials may explode and result in re or
property damage.
The drawer can be removed completely for cleaning, etc.
To Remove the Storage Drawer
Note: To avoid exterior damage to the storage drawer. Ensure
a soft cushioned mat is placed on the oor and covers the
width and depth of the storage drawer.
Pull the drawer right out.
Unscrew the two fasteners and remove the screw washers
from either side of the storage drawer runner brackets
(Fig.2.25).
For safety reasons slide the inner side rails back into the
cavity.
To Fit the Storage Drawer
Note: To avoid exterior damage to the storage drawer. Ensure
a soft cushioned mat is placed on the oor and covers the
width and depth of the storage drawer.
Align the two holes on either side of the storage drawer with
the runner brackets (Fig.2.25).
Fasten the two fasteners and screws washers on either side of
the Storage Drawer.
Close drawer and check the alignment. Adjust storage drawer
position accordingly.
Check the alignment is correct and ensure all fasteners are
fully tightened.
Fig.2.21
Fig.2.22 Fig.2.23
Fig.2.24
Fig.2.25
Loading ...
Loading ...
Loading ...